Johnson Pump 10-13399-03 Aqua Jet WD 3.5 Deck Wash Pump, 13 LPM, 5 bar, S/N, 12V
The quiet and low-pulsation Aqua Jet five-chamber diaphragm system from Johnson Pump is the ideal solution as a deck washing and cleaning device for boats, vehicles and industrial applications
With the higher pressure of up to 5 bar, cleaning is faster and easier than ever before
- Deck wash pump with Santoprene / Nitrile elastomers
- Self-priming up to a height of 2.5m
- Flow rate up to 13 liters / minute (3.5 GPM)
- Dry running without damage
- Motor with built-in overheating protection switch
- Pressure switch switches the pump off at approx. 5 bar (70 PSI)
- Included in delivery: Suction filter 40 MESH, spray nozzle and 12mm (1/2") hose connections
- Power consumption 11.5A; 15A fuse (not included)
- Dimensions: Height 11.6cm / width 13.1cm (without connections) / length 23.6cm
Pump mode of operation: During operation of the pump, the pressure increases until it reaches the predefined cut-off pressure. When the predefined pressure level is reached, the built-in pressure switch switches the pump off. The valves installed in the pump ensure that the pressure is maintained after the pump is switched off. When the spray nozzle is actuated, the pressure drops. If the pressure drops below the switch-on pressure, the integrated pressure switch automatically switches the pump back on.
Product safety information
Manufacturer information:
SPX Flow Inc.
Ballantyne Corporate Pl 13320
North Carolina
Charlotte, USA, 28277
[email protected] https://www.spxflow.com/johnson-pump/
Responsible person:
SPX Flow Europe Ltd
Werkstraße 4
Schleswig-Holstein
Norderstedt, Germany, 22844
[email protected] https://www.spxflow.com/johnson-pump/
If you know already the article number or name of the required spare part, you will end up quickly at the desired spare part by entering it in the search-box.
By entering the article number of the main unit in the search-box, all available spare parts for this main article will be shown. Usually this number is printed on the type plate of the main unit, on the cover or body of impeller pumps, or in your documentation on board.
Alternatively you may navigate through the menu via manufacturer brand and series of the main unit in order to receive the list of available spare parts.
Please contact us in case you need an exploded view of the main unit, if you are struggling on site to clearly determine the required part, or if you need further parts that are not shown in the shop.
