Rule Automatic Bilgepumps
Automatic water sensing submersible bilge pumps and spare parts for the Rule automatic bilge pump range*
Rule automatic bilge pumps check for water every 2 ½ minutes and keep the bilge water at a low level. With a standard pump and float switch, the water can reach 2" (5 cm) before the pump is activated. Rule's automatic bilge pumps are activated at 1.6 cm (5/8") and pump the water down to 0.6 cm (¼").
*Models Rule 500 Automatic (Type 25S, 25S-6, 25S-24, 25SA and 25SA-24), Rule 800 Automatic (Type 20RS and 20SA), Rule 1100 Automatic (Type 27S, 27SA and 27SA-24), Rule 1100 Automatik (Typ 27S, 27SA und 27SA-24), Rule 1500 Automatic (type 51S), Rule 2000 Automatic (type 53S), Rule 3700 Automatic (type 55S), Rule 4000 Automatic (type 56S)
Items 1 - 19 of 19
Rule 25SA-24 - Rule 500 GPH automatic Bilge Pump 24V
Rule automatic submersible bilge pump with a flow rate of up to 2,165 litres / hour (572 gallons / hour), 12V
Rule 1200R Connector 19mm (3/4") hose connection, straight
Rule 1202R Port 25mm (1") hose connection, straight
Rule 1206R Connector 25mm (1") hose connection, straight
Rule 1203R Connector 19mm (3/4") hose connection, 90° elbow
Rule 1205R Connector 25mm (1") hose connection, 90° elbow
Rule 1207R Connector 28mm (1-1/8") hose connection, 90° elbow
Rule 1201R Connector 19mm (3/4") hose connection, 90° elbow
Rule 1204R Connector 19mm (3/4") hose connection, straight
Rule 27SA - Rule 1100 GPH automatic Bilge Pump 12V
Rule 1208R Connector 28mm (1-1/8") hose connection, straight
Rule 1231R Strainer Base for Rule 360 (24*A) und 500 (25*A) pumps
Rule 1232R Strainer Base for Rule 800 / 1100 and Rule Mate Pumps
Rule 27SA-24 - Rule 1100 GPH automatic Bilge Pump 24V
Rule 51S - Rule 1500 GPH automatic Bilge Pump 12V
Rule 53S - Rule 2000 GPH automatic Bilge Pump 12V
Rule 55S - Rule 3700 GPH automatic Bilge Pump 12V
Rule 56S - Rule 4000 GPH automatic Bilge Pump 12V
Items 1 - 19 of 19