Jabsco 17935-0001B Flexible Neoprene Impeller (Single Unit / Bulk)

Jabsco 17935-0001B Flexible Neoprene Impeller (Single Unit / Bulk)

SKU: 11032

HAN:

17935-0001B

Genuine Jabsco 17935-0001B neoprene impeller for seawater pumps. Maximum fit accuracy and long service life for reliable engine cooling

65,49 €

incl. 19% VAT , plus

Currently out of stock

Reseller inquiry

Jabsco 17935-0001B Flexible Neoprene Impeller (Single Part / Bulk)

As the inventor of the flexible impeller pump and an OEM partner to leading engine manufacturers, Jabsco stands worldwide for reliable engine cooling under the harshest conditions. Numerous engines come standard with Jabsco raw water pumps. The original impellers developed for this purpose are used in both seawater cooling systems and demanding industrial applications, and are known for their high dimensional accuracy and long service life.

Technical Data & Parameters

Manufacturer: Jabsco (Xylem)
Part Number (MPN): 17935-0001B
Impeller Profile / Blades: Q-profile / 12 blades
Outer Diameter (A): 3-3/4" / 95 mm
Width/Depth (B): 2-1/2" / 63.5 mm (often rounded and listed as 63 mm)
Shaft Diameter (C): 1" / 25.4 mm
Drive Type: Spline Drive
Hub Material: Corrosion-resistant brass
Body Material: Premium Neoprene (optimized for fresh, salt, and process water)
Temperature Range: approx. 4 °C to 80 °C

Scope of Delivery

Please note that this is the bulk version (single part). Ideal if gaskets and lubricant are already available:

1 x Original Jabsco Impeller (17935-0001)

OEM References & Cross-References

Caterpillar: 5L6042, 5N9360, 1W9046
Detroit Diesel: 5196168, 8924838, 5196628
Onan: 500135
Perkins: 7054
Volvo Penta: 875660, 857636-1, 825942, 807904

Model Comparison: 17935 Versions at a Glance

17935-0001B (this article): The pure single impeller (bulk) without any accessories.
17935-0001-P: The complete service kit including lubricant and the most common body gasket for a professional impeller replacement.

Note on Impeller Markings: Original Jabsco impellers often have the internal production number 17935-0001 or 17935-0101 molded directly into the rubber. These represent the identical component, and the offered impeller 17935-0001B is the exact matching replacement.

The Advantages of Jabsco Original Quality

Specific Rubber Compound: Guarantees precise elasticity and dimensional stability even at extreme fluid temperatures.
Constant Flow Rate: Reliably stable volume flow over many operating hours.
Vulcanized Core: The high-strength vulcanization bond between the brass hub and the neoprene prevents the elastomer from detaching from the hub. The maximum drive torque is fully maintained, and spinning of the hub on the shaft is effectively minimized.
Excellent Memory Effect: The blades straighten up precisely millions of times, ensuring fast and powerful self-priming.
Dimensional Accuracy: Tight manufacturing tolerances ensure an optimal fit in the pump housing and maximize efficiency.

Maintenance, Storage & Service Life

Replacement Interval: As a central wear part of the raw water cooling system, the impeller should be replaced annually as a precaution. A failure can lead to overheating and severe engine damage. Commercial or intensively used systems may require shorter maintenance intervals.
Dry Run Protection: Always use a suitable impeller lubricant (e.g., glycerin) during installation to prevent friction damage (scorch marks) during the first startup.
Storage: Store in a cool, dark, and dry place. Maximum shelf life before initial commissioning: 5 years.

Practical Tip: Always carry at least one spare impeller in your inventory or on board for critical systems. Use an impeller puller for removal to avoid damaging the bronze pump housing.

Product safety information

Manufacturer information:

Xylem Inc.
Water Street SE, Suite 200 301
Washington, DC
Washington, DC, USA, 20003
[email protected]
https://www.xylem.com/

Responsible person:

Xylem Water Solutions Deutschland GmbH
Bayernstraße 11
Niedersachsen
Langenhagen, Germany, 30855
[email protected]
https://www.xylem.com/de-de/

Item information	Value
Brand:	Jabsco
Product portfolio:	Impeller
Diameter (mm):	95
Depth (mm):	63
Impeller hub:	Spline Drive
Shaft Diameter (mm):	25,4
Material:	Neoprene
Number of Blades:	12
Insert Material:	Brass
Shipping weight:	0,80 kg

If you know already the article number or name of the required spare part, you will end up quickly at the desired spare part by entering it in the search-box.

By entering the article number of the main unit in the search-box, all available spare parts for this main article will be shown. Usually this number is printed on the type plate of the main unit, on the cover or body of impeller pumps, or in your documentation on board.

Alternatively you may navigate through the menu via manufacturer brand and series of the main unit in order to receive the list of available spare parts.

Please contact us in case you need an exploded view of the main unit, if you are struggling on site to clearly determine the required part, or if you need further parts that are not shown in the shop.

Contact data

First name - optional

Last name - optional

E-Mail